Kit ProjectsProjectsTurning Projects

Turned Seam Ripper

Seam Ripper
Gold Seam Ripper

I found this seam ripper kit at woodcraft.  They’re incredibly easy to make, and they make awesome gifts.  I made this seam ripper for my mom.  I’m also going to make another one for my wife.  If you have any sewers in your family you should consider making one.  I’ll include links at the bottom of this post where you can pick one up.  The wood I chose for the handle was padauck wood.  It’s an excellent turning wood and looks beautiful when it’s finished.  For the finishing I used EEE Ultra-Shine, and a couple of coats of Shella-Wax.  The combination of these two products really gave it a beautiful shine and should hold up for years.

If you make one of these be sure to post a picture of it over on the WoodLogger Facebook Page.  I’d love to see how yours turns out. (pun intended)

 

 

Material List

  • (1) Seam Ripper Kit
  • (1) 1-1/2″ x 1-1/2″ x 6″ Wood Blank (I used padauck wood)

Milling & Assembly

Seam Ripper Kit Assembly The seam ripper kit available from WoodCraft has a few basic components.  It includes: a brass tube(in this picture it is already inserted in a wood blank), a top and pen clip, four rubber gaskets, blade, blade holder clip, and gold blade handle
Seam Ripper Blank To get started I chose a wood blank made from padauck wood.  It’s a great wood to turn and looks beautiful when it’s finished.  I cut this one to a length about 1/4″ longer than the brass tube included in the kit.
Seam Ripper Blank Prep To create a hole for the brass tube insert.  I used a drill bit sized letter “o”.
Seam Ripper Blank Glue Up Before I inserted the brass tube I used sand paper to scratch up the brass tube.  This is to help the glue have something to hold onto after it is inserted in the tube.  For the glue I used CA glue.  It is a quick drying cement and holds up very well.
Seam Ripper Blank Prep After gluing up the tube; the next step is to use a barrel trimmer to make the ends flush with the brass tube.  This is an important step; if the ends aren’t flush when you go to assemble your kit it’ll look a little strange.
Seam Ripper Turning Next up you’ll want to turn you blank.  I chose a very simple profile for mine.  This is the fun part of turning blanks as you have an unlimited set of options.  I started by using a bowl gouge, and then using a skew.  I left a little thickness on the ends so when I sand it up there will be some wood left.
Seam Ripper FinishingSeam Ripper SandingSeam Ripper Finish Wax When it came to finishing my seam ripper.  I started by sanding the blank to a 600 grit level.  I used a five grit sanding system to help me with that.Next up I applied a few coats of EEE-Ultra Shine.  This product is fantastic and works really well.  When applying it you’ll apply plenty of pressure so that it melts into the wood.The last step is to use a few drops of Shella-Wax.  This is another great wax product, and is applied by using pressure so that the wax heats up.
Seam Ripper Kit Assembly When it came to assembly the first step was to put on the four rubber gaskets on the blade holder.  These gaskets hold the blade holder to the handle and keep it from slipping off.
Seam Ripper Kit AssemblySeam Ripper Kit AssemblySeam Ripper Kit Assembly The kit comes with a blade and plastic blade holder.For assembly I slipped the blade into the holder and then screwed it into the gold blade holder.
Seam Ripper Kit Assembly When inserting the top cap into the blade handle I used a pen press to help out with this.  This could probably be done with a vise or something else, but a pen press works really well.
Seam Ripper The end product turned out great.  This was an easy and fun project to make and can be made in a just a few hours.

 

Enter your email if you want a free subscription to this site(we’ll never share your email):

Items Used to Finish this

 

2 Comments

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Back to top button

WoodLogger Subscription

Subscribe today to keep up to date with the latest news and posts.

  • Receive Latest Posts
  • Updates on Reviews and Give Aways
  • Unsubscribe at any time
  • Email is kept private (We will never share it)
Send this to a friend